Standing seam and metal panel roofing, roof repair and full replacement in Colton. We show up when we say we will, and we clean up before we go.
Everything we do on a roof, done by crews who have been doing it the same careful way since 2002.
New skylights set into metal or shingle roofs, with the flashing kit the roof actually calls for rather than a tube of sealant.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Full tear off, decking checked board by board, then a new metal or shingle roof over proper underlayment. You get the price and the start date before anything comes off.
After a storm we walk the roof, photograph everything we find, and write an itemized estimate you can hand straight to your adjuster.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
A limb through the roof or panels peeled back overnight needs covering now, not next week. We get it dried in first so the inside of the house stops taking damage.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Inspections come free with an estimate. We would rather find the small problem this spring than replace a ceiling for you next winter.
Squirrels, wasps and water all treat a soft soffit as a front door. We close it up properly instead of patching over it.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
Porch roofs, additions and low slope sections that hold water instead of shedding it. We rework the flashing, seal the seams, and get water moving again.
Slate and tile take patience and matching pieces. We replace broken and slipped units and rework the flashing they hide.
Waterproofing details on additions, porches and low slope tie ins, where two roofs meet and most leaks quietly begin.
We work around your hours, weekends included when that is what it takes to keep your doors open while the roof goes on.
A shingle repair should not be visible from the street. We match as close as the weathering allows and blend the new work into the old.
We match the guard to your trees and your gutter profile, and make sure water can still get in where it is supposed to.
Removing the ice is the easy half. We also look at ventilation and insulation so it stops happening every January.
Standing seam and metal panels have been our specialty since 2002. Around Colton that means everything from a small porch roof to a full house in dark green, burgundy or bronze, cut and fit on site by crews who have done hundreds of them.
A metal roof done right in Colton should be quiet inside, straight from the street, and still there long after you have stopped thinking about it. That takes sound decking, real underlayment, and panels that are actually square. We do not skip those parts to save a day.
Why people around Colton call us back and send their neighbors our way.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
A few backed out screws or a whole roof off a church — we take both. No job is too small to get the same crew and the same care.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
If your roof needs a repair and not a replacement, we say so. Plenty of our best customers are people we talked out of a job they did not need yet.
Straight answers to what Colton homeowners ask us most often.
For most Colton homes, yes. A metal roof costs more up front than shingles, but it usually outlives two or three shingle roofs, sheds rain and snow better, and does not peel off in a hard wind. We will price metal and shingle side by side so you can compare real numbers instead of guessing.
Much less than people expect. Over solid decking with underlayment under it, a Colton metal roof sounds about like a shingle roof from inside the house. The loud tin roof people remember was screwed straight to open purlins over a barn with nothing underneath.
A typical Colton shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
That is most of what leak work is. Water runs along decking and rafters before it ever drips, so the stain on your Colton ceiling is rarely under the actual hole. We work back to the real entry point, fix that, and check the rest of the roof while we are up there.
Sometimes. If the decking is sound and there is only one layer of shingles, a Colton metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Yes. Gutters, guards, soffit and fascia are all part of keeping the edge of a Colton roof dry, so we handle them along with the roof instead of sending you off to find somebody else to finish the job.
Real feedback from homeowners whose roofs we have worked on.
"They replaced the soffit and fascia the squirrels had chewed through and closed everything back up tight. No more scratching in the attic at night."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Burgundy metal roof on our brick ranch and I get compliments on it constantly. They brought the color chart out and let us take our time deciding."
Our crews cover the surrounding area, not only the city limits.